ON-LINE PET TRAINING COURSES
Back to blow molding consulting home page
OB Plastics Consulting is pleased to offer high-quality on-line training courses covering a wide spectrum of PET and extrusion blow molding applications directly over the internet. Each session is approximately one hour long unless otherwise noted. Attendees log on to a web site and see the presentation slides. At the same time they listen to the presenter over a separate phone line.
Telephone charges are included in the presentation fee unless you live outside the US/Canada. In this case surcharges apply which are shown here. It is also possible to connect through Skype at no cost but service interruptions may be encountered. Questions can be typed in during the presentation and there will be a "live" question and answer period at the end of each hour. We will also answer questions emailed to us after the course within reasonable limits.
Registered participants will receive the presentation slides ahead of time, and are encouraged to print them out for note-taking during the live session.
Read the very positive results of our participants' survey here
and some testimonials here.
Each course is available for US$125 or CAN$125 plus GST for Canadian
companies. Discounts for multiple
choices/participants are available upon request. Please email
or call: ++1-902-531-2028
Please click on the course you are interested in to see the summary and go to the registration page. To improve our service in the Asia-Pacific area, we have added a "Night" course and offer now all courses three times at the day listed below. Please check time of day for your time zone from the course outline page of each individual course. For two courses the times are different this time around and I have added these new times right in Eastern Daylight Savings times beside the course title!
Topics
| A Primer in Preform Design | Mar 16, 2010 |
| Introduction To PET Preform And Bottle Molding Technology |
on request |
| Understanding PET From A Molder’s Perspective |
Mar 15, 2010 |
| Introduction To Two-Stage Stretch Blow Molding Technology |
Mar 17, 2010 |
| Process Parameters: Single-Stage Injection Stretch Blow Molding | on request
|
| Barrier Technologies: Efficiency, cost, challenges | Mar 18, 2010 |
| Heat Set Technology: Process, Bottles, Material |
Mar 19, 2010 |
| Stress Cracking of Carbonated Soft Drink Bottles |
on request |
| Machine Selection: One-Stage, 1.5 Stage Or Two-Stage July |
on request |
| Extrusion Blow Molding for Beginners |
on request |
|
Adjusting
the Extrusion Blow Molder for Maximum Productivity
|
on request |
| On-Line Vision Inspection for High-Speed Bottle Applications | on request |
Have you taken our on-line tutorial yet? It is free and gives you a short overview of PET packaging technology. Over 2,500 professionals from all over the world have taken it so far! Register here!
Sometimes excellent seminars are cancelled when too many people wait until the last minute to register. Our courses
have to recover their costs, and we need a minimum number of participants registered before a program can run. Avoid
disappointment. Register early!
Alternate course dates and times may be available: please contact us for
further information. We reserve the right to change dates and times to
accommodate registrations, with reasonable notice given. No schedule
changes or refunds within 2 business days of class time.
Back to blow molding consulting home page